General Problems With The Dishwasher - Miele G 4205 Operating Instructions Manual

Frequently asked questions

General problems with the dishwasher

Problem
The indicators and the
display is dark. Only
the "Start/Stop"
indicator flashes
slowly.
Detergent is left in the
dispenser at the end of
a program.
The detergent lid
cannot be closed
properly.
The door and the
interior walls are still
wet after a program has
finished.
Water remains in the
wash cabinet at the end
of a program.
32
Possible fault
The dishwasher has
gone into "Standby"
mode to save energy.
The dispenser was damp
when detergent was
added.
Detergent residue is
blocking the catch.
This is not a fault!
It is the normal operating
mode of the drying
system.
The triple filter in the
wash cabinet is clogged.
The drain pump or the
non-return valve may be
blocked.
The drain hose is kinked. Remove any kinks from the
Solution
Press the K button to exit
Standby mode.
Dry the dispenser before
adding detergent.
Remove the residue.
The moisture will evaporate
after a short time.
Before fixing the fault:
– Press the K button to
turn the dishwasher off.
Clean the triple filter. See
"Cleaning and care".
Clean the drain pump and
the non-return valve, see
"Cleaning and care".
drain hose.