Key Test - Casio SE-S10 Service Manual

[ 22 ]

KEY TEST

[Function]
Tests if keys are recognized correctly. Each key is assigned with a hard key code. This test checks if
correct hard key cords are assigned.
All keys except for [FEED] and [C (Clear)] may be tested.
Pressing [C (Clear)] will terminate the test.
The result of this test is not printed out. An operator must be present during this step to determine the
result.
[Operation]
9 4
Command:
(1) Press any key to display a hard key code assigned to the key on the 7-Segment.
<Example of Display on 7-Segment>
(2) To check if the number displayed on the 7-Segment is correct, refer to the Hard Key Code Chart.
(3) When all keys are tested, press [C (Clear)] to end the test.
Commands are printed out when the check ends.
<Hard Key Code Chart>
034 033
030
FEED C
AC
007 008 009
004 005 006
001 002 003
000 011 012
[PRINT OUT]
KEY
ESC
END
SUBTOTAL
032 031
022 019
029 024
021 018
028 023
027 020 015
026 014
025 013
94
94
— 28 —