Rac Write/Read Test - Casio SE-S10 Service Manual

[ 10 ] RAC WRITE/READ TEST
[Notes]
Proper operation is not guaranteed for the internal data and main device of RAC used in this test.
Be sure to perform RAC CLEAR TEST before this test.
[Function]
Tests if RAC is connected correctly.
You may check for all areas by performing RAC CLEAR&WRITE/READ TEST.
[Operation]
n 0
Command:
n: Number of times to run
0 Once
1 ~ 9 Infinite loop
● If a command to specify the number of times to run the test is omitted, the test is performed only once.
● To forcibly terminate the infinite loop, press [C (Clear)] or turn the Mode Switch to [OFF].
[PRINT]
RAM
RAM WR
END
1 4 SUBTOTAL
14
OK
14
— 16 —