Table of Contents
Advertisement
1.0 Introduction (cont')
EVA-SG2-BLK and EVA-SG2-WHT: standard grids for typical down angles with small arrays, or top
and bottom suspension for extreme down angles in large arrays of EVA-1151D subwoofer and/or EVA-
2082S full-range modules. NOT FOR USE WITH EVA-2151D subwoofer.
EVA-EG2-BLK and EVA-EG2-WHT: extended grids for extreme down angles in small to medium arrays
and typical down angles in large arrays. This is the only grid for flying EVA-2151D subwoofers.
EVA-CG: coupler grid for flying EVA-1151D subwoofer modules behind an EVA full-range array.
The three different grid options (EVA-SG2, EVA-EG2 and EVA-CG) are sold separately. Consult
EVADA software for proper grid selection.
NOTE: SEriES 2 GriDS (EVA-SG2, EVA-EG2) ArE rEquirED TO fLy EVA SuB-
WOOfEr MODuLES. OLDER GRIDS (EVA-SG, EVA-EG) ARE FOR FLyING EVA FULL-
RANGE MODULES ONLy.
EVA-GXB-BLK and EVA-GXB-WHT: optional second spreader bars for EVA grids, to be used when
two-point front-to-back hangs are desired. Note: the need to maintain sufficient pressure on the forward
rigging point will limit the amount of down angle available with the standard EVA grids (EVA-SG or EVA-
SG2) in this configuration.
CDG: optional dual-gland-nut input-panel cover to protect the input connections from water. Note that
this cover is supplied with the weather-resistant versions of EVA modules.
CSG: optional single-gland-nut input-panel cover to protect the input connections from water.
CDNL4: optional input-panel cover equipped with dual Neutrik Speakon® NL4 connectors, providing a
quick-disconnect alternative to the standard Phoenix screw-terminal input connectors.
6
Electro-Voice EVA Series User Manual
Advertisement
Table of Contents
