Airplane Use - Graco SnugRide 35 Instruction Manual

Hide thumbs Also See for SnugRide 35:
Table of Contents

Advertisement

Available languages

Available languages

8.1 Airplane Use

Install in an airplane the same way as
in an automobile with a lap only belt. Notify
the airline ahead of time that you intend to
bring the seat on board.
Use only in forward-facing aircraft seat. Follow the flight
attendants instructions about infant restraint placement.
Do not use this infant restraint if the airplane seat belt does not
hold the infant restraint securely.
8.2 Storing LATCH
1.
For ease of storing, extend
UAS to its maximum length.
2.
Locate the storage bars on
bottom of infant restraint base ›.
3.
Fasten connector (without
adjustment belt) onto storage bar.
4.
Repeat step 3 for connector
with adjustment belt. After
fastening onto storage bar,
pull on adjustment belt to make
sure UAS is securely fastened.
5.
UAS storage should look
like this when complete ›.
Storage bars
Underside of base
41

Advertisement

Table of Contents
loading

Table of Contents