Bt Freelance Xd 5500 Multipack Users Only; Connect The Charger(S) And Charge; The Handset(S) - BT Freelance XD 5500 User Manual

8011 Freelance XD5500 UG [1]
10 Getting started
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
22/1/07 11:07
BT Freelance XD5500 – Issue 2 – Edition 1 – 22.01.07 – 8011
BT Freelance XD 5500 multipack
users only:
Place each BT Freelance XD 5500 charger within reach of a
mains power wall socket.
Connect the charger(s) and charge the handset(s)
1. Plug the mains power adaptor into the power socket on the
underside of the charger and plug the other end to the mains
power wall socket.
2. Insert the 2 x AAA rechargeable batteries supplied, taking
note of the polarity markings inside the battery compartment,
then slide the battery compartment shut.
next to the time, where
HSX
number, e.g. 2, 3 etc.
3. Place the handset on the charger. The red charging light
comes on. You should let the batteries charge continuously
for at least 24 hours.
Page 10
is the next available handset
X