Step 3, Install Side Panels - GE ZIC360NXRH Installation Instructions Manual

STEP 2A WATER LINE INSTALLATION WITH
A REVERSE OSMOSIS SYSTEM
Skip this step when not using an RO System
If the water supply to the refrigerator is from a Reverse
Osmosis Water System, use the refrigerator's filter bypass
the RO filter can result in hollow ice cubes.
Filter Bypass Plug
STEP 3 INSTALL SIDE PANELS
Skip this step when not using side panels
If you are using 1/4" side panels, they should be inserted
into the case trim. Fasten the panels to the refrigerator
with stick-on hook and loop fastener strips before setting
refrigerator in place.
Installation Instructions
11
STEP 4 INSTALL ANTI-TIP BRACKETS
WARNING:
possibility of tipping forward.
ATTENTION:
vers l'avant.
" x 4" x 35" block and secure the block to the
84"
cord into the receptacle. Open the grille panel and reach into
the opening at the back to grasp the power cord. Pull the power
cord into the opening as you push the refrigerator back.
front corners.
Important Note: When the refrigerator is installed under a soffit or if
there is not enough height for this method of security, brackets cannot
be used. Proceed to step 5 to level the refrigerator and then to step 6
prevent tipping.