Table of Contents
Advertisement
5. An installation screen will appear telling you that the system is installing
drivers for the ISA Modem for Windows.
6. Wait for the installation of the driver software to complete. Windows will
continue loading after completing installation of the modem drivers.
When performing a completely new installation of Windows 95 it will be
necessary to physically remove the 56K DSVD Modem. Windows 95 will not
recognize the modem during installation of the operating system. After
completing installation of Windows 95, install the modem as outlined in
instructions given above. Remember to follow all cautions or warnings given
for installing this modem.
Note:
This message does not apply to Windows 95 upgrades to Windows 98. The
modem drivers will be carried over to Windows 98.
Windows 95 retail version which also shipped on earlier IBM PCs installs
differently:
1. After you power up your computer, a window will appear that says "New
Hardware Found". Select the option "Driver from disk provided by
Hardware Manufacturer", and then click the OK button.
2. Insert the ISA Modem for Windows diskette into your diskette drive and
click the OK button.
3. The next screen will confirm that you are installing initialization
software for the ISA Modem for Windows. Click the OK button.
4. An installation screen will pop up telling you that the system is installing
drivers for the ISA Modem for Windows.
5. Wait for the installation of the driver software to complete. Restart the
computer if prompted to.
Important!
3-7
56K Modem Internet Kit
Advertisement
Table of Contents
