Midland GXT500 ,GXT550, GXT565 Owner's Manual page 9

Model GXT500/550/565 Series
GXT500/550/565 SERIES QUICK REFERENCE CHART
MENU
Channel
Press &
1~22
hold Menu
button
WX Channel
1~10
MONITOR
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.
SCAN
Your GXT500/550/565 Series can scan all 22 channels for activity. To
enter, quickly press the SCAN button. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 22 channels and stop on
any active channel for 5 seconds before resuming scan.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel. To
resume scanning, quickly press the SCAN button.
Page 9
eVOX
Power
Privacy
oF/1/2
H/M/L
oF~38
Roger Beep
Vibrate
On/Off On/Off
www.midlandradio.com
®
Call Tone
Silent Operation
1~5 On/Off