Paper Specifications - Panasonic KX-P3196 Operating Instructions Manual

Paper Specifications
It is recommended that paper which may be used with this unit is within the specification provided below.
Fanfold Paper
Width: 76.2-254 mm (3-10")
Quality and number of sheets:
Type of paper
Fine-quality paper
Non-carbon
Multi-layered with carbon
r
only for the last sheet)
Note:
Rear
1
2-5
2
Sheets Weight
Bottom
Ibs_ g/m'
1 12-24 45-90
2-6
11-14 (17') 41-53 (64')
3
11-14 (17') 41-53 (64')
• To insure optimum print quality, 60-82.5 g/m' (16-22 Ibs.) is recommended for graphic printing.
• In multi-layered paper with carbon, the carbon is equivalent to a sheet of paper.
• "Weight in pounds" represents the weight of 500 [432 x 559 mm (17 x 22")] sheets.
• When Bottom Feeding, the printer will handle multi-part forms up to 0.43 mm (0.017") thick.
Up to 6 copies of 14 Ibs. chemical release paper can be used.
• When Rear Feeding, the printer will handle multi-part forms up to 0.36 mm (0.014") thick.
Up to 5 copies of 14 Ibs. chemical release paper can be used.
Continuous Labels
Width of the backing sheet: 76.2-254 mm (3-10")
Thickness of the backing sheet: 0.07-0.09 mm (0.0028-0.0035")
Total thickness: 0.16-0.19 mm (0.0063-0.0075")
Label weight: 68 g/m' (17 Ibs.)
Quality: fine-quality paper
Label size: See the figure below.
63.5
mm
(2.5")
minimum
~I"
------'-------'-----,
23.8
mm
(0'94"~!
[
1
minimum .
Corner radius=
2.5
mm
(0.1")
minimum
Note:
• Use only labels mounted on continuous backing sheets.
• Bottom tractor mode only.
• According to thickness of the label or a kind of the glue, some labels may not be usable.
Single Sheet
Width: 102-297 mm (4-11.7")
Height: 127-363 mm (5-14.3")
Weight in pounds (g/m'): 52.5-90 g/m' (14-24 Ibs.)
Note:
• Paper should be within operating temperature and humidity ranges at least 24 hours prior to use.
• Due to letter head varying in paper weight and construction, we cannot guarantee print quality and paper
handling for all types.
39