Tearing Off Paper - Panasonic KX-P3196 Operating Instructions Manual

18
Handling Paper
5
o
Separate the paper guides to the
approximate width of your paper
or envelope.
Note:
• To predetermine your left most print
position, move the left paper guide
until it clicks into place.
8
Insert a sheet of paper through the
paper guides.
The paper will be automatically loaded to the
first print line.
Tearing off Paper
6
Note:
• To disable AUTO LOADING, turn it OFF
in the INSTALL Menu on your Setup Disk
(oF P. 26-27) or by using the Control
Panel ( ... P. 33-34) .
• If
AUTO LOADING is disabled, you must
press
I
LOAD/PARK
I
to load paper.
• If you need to align the paper horizontally
or vertically, set the paper feed selector to
"
[]~
". This releases the paper and
allows the paper to be positioned
manually as required. Set the selector
back to
"0
"before printing.
If the ON LINE indicator is not lit,
press I ON LINE
I
to get ready to print.
With fanfold paper installed, this function allows you to advance your paper to the tear position. After tearing off the
page you can return your paper to the first printer line by pressing
I
TEAR OFF
I
again.
If
I
TEAR OFF
I
is not
pressed a second time, the printer will automatically reverse to the first print line upon receiving data from the
computer.
1
Press ITEAR OFF
I
to advance the
paper to the tear position.
2
Tear off the page.
Smoked plastic
TEAR
OFF
3 Press I TEAR OFF
I
to reverse the
paper back to the first print line.
Note:
• The printer is equipped with a TEAR OFF
feature that automatically advances the
paper's pelioration to tear off position
when printing is completed. To enable
auto TEAR OFF, set to AUTO in the
I NST ALL Menu on your Setup Disk
(ow P. 26-27) or by using the Control
Panel ("'" P. 33-34).