Troubleshooting - Midland WR-300 Owner's Manual

WR-300 Owner's Manual
T roubleshooting:
T roubleshooting:
Problem
Problem
No power
No sound
No weather broadcast when you press
WEATHER/ SNOOZE button
The radio is not responding properly to
NWS weather alert broadcasts
Page 12
Suggestion
Suggestion
Make sure the AC Power Adapter is
securely plugged into both DC jack on back
of weather radio and into wall outlet. Make
sure batteries are installed in case AC
power fails.
Check VOLUME control to ensure volume
is turned up to an audible level.
Ensure that telescoping antenna is up and
fully extended.
If you are using an external antenna,
ensure that it is connected properly.
Ensure that the radio is set to the NWS
weather channel in use in your area.
Contact NWS to ensure they are presently
broadcasting.
If in a metal structure, make sure you are
close to a window.
If in a weak signal area, you will need an
external antenna.
Check to see that you have programmed in
the correct S.A.M.E. County Code(s).
Check with the NWS that the tower is
broadcasting.
www.midlandradio.com