Generator Components - Wen 3500 Owner's Manual

Please familiarize yourself with the locations and functions of the various components and controls
of your generator.
(1) Fuel Cap- Access to the fuel tank for adding
fuel.
(2) Voltage Selector-To switch between 120 and
240 Volt output.
(3) Circuit Reset Buttons- Reset buttons that protect
the generator from electrical overload.
(4) Power Indicator-Green lights that turn on to
indicate the output of power to each receptacle.
(5) 240/120 Volt AC Receptacle- To connect
electrical devices that run 120 and/or 240 Volt, 60
Hz, single phase, AC current.
(6) Ground Terminal- Connect grounding wires
here to properly ground unit.
(7) Engine hour counter.
(8) 120 Volt AC Duplex Receptacle- To connect
electrical devices that run 120 Volt, 60 Hz, single
phase, AC current.

GENERATOR COMPONENTS

(9) 12V Cigarette lighter Style DC Receptacle.
(10) Oil Fill and Dipstick- Location for checking and
filling engine oil.
(11) Engine Switch- To start/stop engine.
(12) Recoil Starter- Pull-cord for starting engine.
(13) Fuel Filter Cup- Traps dirt from fuel before it enters
the engine.
(14) Air Cleaner- A removable, cleanable, sponge-like
element that limits the amount of dirt pulled into the engine.
(15) Choke Lever- Adjusts the amount of air let into the
engine.
(16) Fuel Valve- Allows fuel to enter engine.
(17) Fuel Gauge- Indicates the amount of fuel in the tank.
(18) Spark Plug- Provides proper engine ignition.
(19) Muffler- Reduces engine noise.
9