Advertisement
Installing in the Unit Continued
After the homerun cabling is in place,
before beginning the equipment
installation in the unit
Connect the homerun to the D2 Lite
enclosure
Use one of the available APMT FEED (OUT) ports
REMEMBER: the ports with the "*" have a
signal level 4.5dBm lower than the other
ports and should be connected to the
units with the shortest homerun lengths
All homeruns should be tagged at the D2
Lite enclosure to ensure easy
unit/homerun identification in the future
Ports 1, 2, 3, 4 are connected to SWiM16 #1
Ports 5, 6, 7, 8 are connected to SWiM16 #2
(when installed)
Advertisement
