Midland GXT710 Series Owner's Manual page 12

Model GXT710/735/750 Series
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an "rb" icon while on the right of the "rb" display, an
"oF" icon appears. Select "on" by pressing the
the PTT key, or press MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an "rb" icon while on the right of the "rb" display, an
"on" icon appears. Select "oF" by pressing the
the PTT key, or press MENU button to move to the next feature
setting.
CALL ALERT SELECTION
Your GXT710/735/750 Series has 5 selectable CALL ALERTS (10 for
GXT750). To select, press the MENU button until a "CA" icon appears
and to the right of the "CA" icon the current CALL ALERT setting is
displayed. Then press the
selections, the radio will emit a corresponding tone for each selection.
To confirm, press the PTT button or press MENU button to move to the
next feature setting.
Note : GXT750 has 5 additional "Animal Sound" CALL
Alerts - Turkey, Duck, Crow, Cougar, Wolf.
VIBRATE ALERT
To turn the VIBRATE ALERT on, press the MENU button until the
display will show the VIBRATE-ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an "oF" icon appears. Select "on" by
pressing the
button. The VIBRATE ALERT icon will remain on the display.
To turn the VIBRATE ALERT off, press the MENU button until the
display will show the VIBRATE ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an "on" icon appears. Select "oF" by
pressing the
button. The VIBRATE ALERT icon will go off.
Page 12
/
buttons and push the PTT button, or press MENU
/
buttons and push the PTT button, or press MENU
/
buttons to make the CALL ALERT
www.midlandradio.com
/
buttons and push
/
buttons and push
®