Midland GXT710 Series Owner's Manual page 10

Model GXT710/735/750 Series
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK
button for 2 seconds. The KEY LOCK icon will appear on the display.
PTT and CALL will still be active. Repeat the same procedure to
unlock the keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 5
seconds. The display illumination can also be activated when the
MENU, MON/SCAN, and
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the
of the 22 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
SETTING PRIVACY CODES
Your GXT710/735/750 Series has 121 Privacy Codes available. The
selected Privacy Code may be different for each channel. To select a
Privacy Code for the current channel press the MENU button twice,
and then the
again the MENU button and the
CTCSS Codes or one of the 83 DCS Codes. The Privacy Code icon
on the display will indicate whether you set your Privacy Code in
CTCSS or DCS mode. To confirm the selection, press the PTT button
or press MENU button again to move to the next feature setting.
Note : If you select any CTCSS Privacy Code, any pre-selected
!
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two GXT710/735/750
Series radios, all radios in your group must be set to the
same channel and Privacy Code selections.
Page 10
/
/
buttons to select between "Off/CTCSS/DCS". Press
button is pressed.
/
/
button to select one of the 38
buttons to select one
www.midlandradio.com
®