If You Forget The Password; Entering The Password Recall Procedure - BenQ SX920 User Manual

If you forget the password

If the password function is activated, you will be asked to enter the six-digit password every time you
turn on the projector. If you enter the wrong password, the password error message is displayed lasting
for three seconds, and the Input Password page follows. You can retry by entering another six-digit
password, or if you did not record the password in this manual, and you absolutely do not remember it,
you can use the password recall procedure. See
details.
If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a
short time.

Entering the password recall procedure

1. Make sure the Input Password page is displayed on screen. Press
AUTO. The projector will display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode the number.
You may be required to provide proof of purchase documentation to
verify that you are an authorized user of the projector.
"Entering the password recall procedure" on page 27
Recall Password
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
27 178 32 7
MENU
Using the projector
for
Exit
27