Page 2
Quick Guide NOTE: Press the RUN key at anytime to exit programming. 1. Set the Clock Press Display a. Enter clock setting mode CLOCK b. Set current day c. Set current time TIME TIME d. Exit clock setting mode 2. Starting Over a.
Page 3
Press Display e. Set the temperature for HEAT SET PT COOL HEAT/COOL heating SETPOINTS HEAT COOL SET PT f. Set the temperature for HEAT COOL SET PT HEAT/COOL cooling AUTO SETPOINTS WAKE HEAT COOL SET PT AUTO WAKE NOTE: If you lower cool temperature closer than 3°, the heat setpoint will lower to keep the 3°...
Page 4
Press Display i. Repeat steps 3b-h to program LEAVE, RETURN and SLEEP for the first day j. Copy program to rest of the days (Hold DAY RETURN key to display each weekday) k. Exit programming mode (saves program) 4. Changing the Program a.
Page 5
5. Programming System, Humidity and Frost Press Display a. Set system SYSTEM SYSTEM HEAT OFF COOL b. Set % humidity (to program your frost HUMIDITY setting if outdoor sensor is installed, press humidity key a second time) Changing the Program Temporarily a.
Page 6
See Owner’s Guide, form 69-0891 for more information. If you have questions regarding the Honeywell Perfect Climate Comfort Center please visit our web site at www.honeywell.com/yourhome or call the customer information line at 1-800-468-1502. SYSTEM CHECK...