Introduction; Before You Get Started; Shipment; Initial Operation - Behringer Eurolive B415DSP User Manual

Hide thumbs Also See for Eurolive B415DSP:
Table of Contents

Advertisement

1. INTRODUCTION

Thank you very much for expressing your confidence in
BEHRINGER products by purchasing the EUROLIVE B415DSP.
The B415DSP is a state-of-the-art digitally controlled PA speaker
system that will simply blow you away. Its bi-amped 600-Watt
engine drives a high-efficiency 15" woofer for brutal punch and
a 1.75" titanium driver for high-end resolution. The built-in mixer
allows you to run the show without any extra equipment.
A powerful 24-bit DSP controls the crossover, a dual compressor/
limiter, phase and time corrections and even a noise gate. The
intelligent dynamic EQ makes sure your system sounds perfect
at any sound level.
+

1.1 Before you get started

1.1.1 Shipment

Your B415DSP was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of damage.
+
+
+
+

1.1.2 Initial operation

Be sure that there is enough space around the unit for cooling.
To avoid overheating, do not place the B415DSP on top of power
amps or near radiators, etc.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all international safety
certification requirements.
+
EUROLIVE B415DSP
+

1.1.3 Online registration

Please remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com and
read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have
it repaired as quickly as possible. To arrange for warranty service,
please contact the retailer from whom the equipment was
purchased. Should your BEHRINGER dealer not be located in
your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!
1. INTRODUCTION
5

Advertisement

Table of Contents
loading

Table of Contents