Denon DN-202WR User Manual page 6

4. Use XLR cables or 1/4" (6.35mm) cables to connect your DN-202WR's
outputs (balanced or unbalanced) to your loudspeakers, mixer,
amplifier, or other device that accepts line-level inputs (make sure this
device is powered off).
5. Use the included power adapter to connect DN-202WR's power
input to a power outlet. It will power on immediately.
6. Connect your loudspeakers, mixer, amplifier, or other output device to
a power outlet, but do not power it on yet.
7. Press and hold the Pair button on DN-202WT for 3 seconds. Its
Status Light will start flashing rapidly.
8. Within approximately 15 seconds, press and hold the Pair button on
DN-202WR for 3 seconds. Its Status Light will start flashing rapidly.
If you need to pair multiple DN-202WR units to DN-202WT, do this
step with all of them within the 15 seconds.
9. Wait until the Status Lights on both DN-202WT and DN-202WR are
solidly lit (not flashing), indicating that they are paired.
10. Power on your loudspeakers, mixer, amplifier, or other output devices.
You can now use DN-202WT and DN-202WR to play audio wirelessly.
6