Denon DN-202WR User Manual page 5

Setup
For an example of how you could set up DN-202WR, please see the
Example diagram later in this section.
Items not listed under
Important:
For stereo operation, make sure left and right inputs are connected to left
and right outputs, respectively.
Make sure DN-202WR and DN-202WT are within 100 feet (30.5 meters) of
each other.
Do not use DN-202WR near a microwave oven, which can interfere with
the reception.
1. Use XLR cables or 1/4" (6.35mm) cables to connect DN-202WT's
inputs (balanced or unbalanced) to your mixer, media player, or other
audio source.
2. Use the included power adapter to connect DN-202WT's power
input to a power outlet. It will power on immediately.
3. Connect your mixer, media player, or other audio source to a power
outlet, and then power it on.
Introduction > Box Contents are sold separately.
5