Miele FN 35402 i Operating And Installation Instructions page 48

Problem solving guide
Interior lighting
Problem
The LED lighting is
not working.
48
Possible cause
To avoid overheating, the
lighting switches itself off
automatically after approx.
15 minutes if the door is left
open.
If this is not the case, then
there is a fault.
Remedy
^ Close the appliance door.
When the door is reopened,
the interior lighting will work
again.
^ Call Miele.
The LED lighting may only
be repaired or changed by
a Miele authorised service
technician. Current-carrying
components are located
underneath the light cover.
Danger of injury and
damage!
Do not remove the cover.
If the cover is damaged
or needs to be removed
due to damage, exercise
caution. There are lasers
in the lighting (laser
beam class 1M) which
you should avoid looking
at directly. Do not use
optical instruments
(magnifying glass or
similar) to look at the
lighting either.