Table of Contents
Advertisement
4.
5.
Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, do the following:
1.
2.
User's Manual
For models with Recovery Media Creator pre-installed:
Click Recovery Media Creator under TOSHIBA group in the Apps
view.
For models without Recovery Media Creator pre-installed:
Click Control Panel -> System and Security -> Action Center ->
Recovery -> Create a recovery drive under Windows System in the
Apps view.
Follow the on-screen instructions to finish creating the Recovery
Media.
Make sure that the AC adaptor is connected during the restoring
process.
Make sure to dock the tablet computer to TOSHIBA Keyboard Dock
before restoring the operating system (only for Z20t-B).
When you reinstall the Windows operating system, the internal storage
will be reformatted and all data will be lost.
Make sure to use the default Boot Mode option in the BIOS setup
utility before restoring.
1.Launch the BIOS setup utility.
Refer to the
TOSHIBA Setup Utility
2. In the BIOS setup screen, select Advanced -> System
Configuration -> Boot Mode.
Note: Skip the following contents if you cannot find the Boot Mode
option in your system.
3. Select UEFI Boot (Default).
If you set the Boot Mode as CSM Boot, the recovery media created by
Recovery Media Creator will NOT be able to restore.
If you create a recovery image using advanced recovery tools from
Control Panel, also make sure to use the default Boot Mode option
(UEFI Boot) in the BIOS setup utility before restoring.
Load the Recovery Media into the external optical disc drive or insert
the recovery USB Flash Memory into one available USB port.
Click the power icon (
section for further information.
) on the Start screen, and select Restart.
5-24
Advertisement
Table of Contents
