Miele KM 3014 Operating And Installation Instructions page 26

Cleaning and care
Cleaning
Ceramic surface Wipe all coarse soiling off using a damp cloth.
Stubborn soiling may need to be removed with a
shielded scraper blade.
Clean with Miele ceramic glass and stainless steel
cleaner (see "Optional Accessories"), or with
another proprietary ceramic glass cleaner and
kitchen roll or a clean soft cloth.
Do not put cleaning agent onto a hot hob as this
can cause staining.
Wipe with a damp cloth then dry off with a soft
cloth.
Pan supports Remove the pan supports.
Wash them in the dishwasher or with a sponge
and warm water with a little washing-up liquid.
If necessary, you could use the scouring pad on
the reverse of a washing-up sponge.
Controls With a sponge and warm water with a little
washing-up liquid.
Burners Remove all loose parts of the burner.
Wash them with a sponge and warm water with a
little washing-up liquid
Wipe all the non-removable burner parts with a
damp cloth.
Ignitors Wipe carefully with a well wrung-out damp cloth.
Ignition safety
devices
26
Instructions
Do not use washing-up
liquid as this will not remove
all soiling and deposits. It
will form an invisible coating
which will cause permanent
discolouration of the
ceramic surface which
cannot be removed.
When using a proprietary
ceramic glass cleaning
agent, always follow the
manufacturer's instructions.
Not dishwasher proof.
Not dishwasher proof.
Make sure that the flame
slits are completely dry after
cleaning.
Do not let the ignitor get
wet. If it gets wet it will not
spark.