Inserting Key Caps - Wincor Nixdorf POS Keyboard TA61 User Manual

The labels are replaced as follows:
Remove the key cap from the keyboard (see removing the key cap)
and pull the transparent key cap upwards.
The transparent key cover is then released and the label can be
removed.
Replace the label and fit the transparent key cover (with the mat and
concave side facing upwards) back into the key cap.

Inserting Key Caps

quadruple key cap with scissors
Inserting Key Caps
cam
Insert the key cap in the keyboard
and press firmly into place.
rocker plate
When inserting double or triple keys,
please ensure that the guide cylinder
is on the left. The quadruple key
caps are corresponding - with the
guide cylinder arranged on the upper
left.
Ensure while putting on the key
caps that the white cam of the rocker
plate are in the planned bulge of the
keyboard.
If you hear a click, the key caps are
inserted correctly.
Inserting Key Caps
GB - 7