Inserting Key Labels - Wincor Nixdorf POS Keyboard TA61 User Manual

Mounting keys

Inserting Key Labels

Below, you will find instructions on how to insert the key labels:
GB - 6
Now remove this key from the key-
board by pulling upwards.
If the key that has been removed has
a number or character on it, you can
change the lettering as follows:
Using a thin object (e.g. paper-clip
etc.), press upwards against the
plastic cover through the opening on
the underside of the key. Please re-
fer to the next chapter for instructions
on how to insert the new label.
Inserting Key Labels
Each key should be labelled indivi-
Transparent key co-
ver with mat and
dually. You can use the empty labels
concave side up
delivered with the system to do so.
Place the written label on the key
Label for keys
cap.
Insert the transparent key cover with
the mat and concave side upwards
Key cap
until it clicks into place in the key cap.
Mounting keys