System - D-Link DCS-1201 User Manual

Hd covert network camera

Hide thumbs Also See for DCS-1201:

Table of Contents

Section 3: Configuration

In this section, you may backup, restore and reset the camera configuration, or reboot the camera.

Save To Local Hard Drive:

Load From Local Hard Drive:

Restore to Factory Defaults:

Reboot Device:

Enable Schedule Reboot:

CSRF Protection:

D-Link DCS-1201 User Manual

You may save your current camera configuration as a file

on your computer.

Locate a pre-saved configuration by clicking Browse and

then restore the pre-defined settings to your camera by

clicking Load Configuration.

You may reset your camera and restore the factory

settings by clicking Restore Factory Defaults.

This will restart your camera.

If you want your camera to reboot on a regular schedule,

check the Enable Schedule Reboot checkbox, then

select the days and time you want the camera to reboot

on.

Select this to enable cross-site request forgery (CSRF)

protection for your camera.

System

Table of Contents