Internet Connection Setup Wizard - D-Link DCS-1201 User Manual

Section 3: Configuration
This wizard will guide you through a step-by-step process to configure your new D-Link
Camera and connect the camera to the internet. Click Next to continue.
Select how the camera will connect to the Internet.
If your camera is connected to a router, or if you are unsure how your camera will
connect to the Internet, select DHCP Connection.
Select Static IP if your Internet Service Provider has provided you with connection settings, or
if you wish to set a static address within your home network. Enter the correct configuration
information and click Next to continue.
If you are using PPPoE, select Enable PPPoE and enter your user name and password.
Click Next to continue.
D-Link DCS-1201 User Manual

Internet Connection Setup Wizard

22