DFI-ITOX EL330-DR User Manual page 89

Load Fail-Safe Defaults
The "Load Fail-Safe Defaults" option loads the troubleshooting de-
fault values permanently stored in the ROM chips. These settings are
not optimal and turn off all high performance features. You should
use these values only if you have hardware problems. Highlight this
option in the main menu and press <Enter>.
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PCI Health Status
Esc : Quit
F10 : Save & Exit Setup
If you want to proceed, type <Y> and press <Enter>. The default
settings will be loaded.
Phoenix - AwardBIOS CMOS Setup Utility
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Load Fail-Safe Defaults (Y/N)? Exit Without Saving
↑ ↓ → ←
Load Fail-Safe Defaults
BIOS Setup
: Select Item
3
89