DFI-ITOX EL330-DR User Manual page 65

Typematic Rate Setting
Disabled Continually holding down a key on your keyboard will
Enabled The BIOS will not only report that the key is down,
Typematic Rate (Chars/Sec)
This field allows you to select the rate at which the keys are acceler-
ated.
Typematic Delay (Msec)
This field allows you to select the delay between when the key was
first depressed and when the acceleration begins.
Security Option
This field determines when the system will prompt for the password
- everytime the system boots or only when you enter the BIOS
setup. Set the password in the Set Supervisor/User Password
submenu.
System The system will not boot and access to Setup will be
denied unless the correct password is entered at the
prompt.
Setup The system will boot, but access to Setup will be denied
unless the correct password is entered at the prompt.
MPS Version Control for OS
This field is used to select the MPS version used by the system.
cause the BIOS to report that the key is down.
but will first wait for a moment, and, if the key is still
down, it will begin to report that the key has been
depressed repeatedly. For example, you would use such
a feature to accelerate cursor movements with the ar-
row keys. You can then select the typematic rate and
typematic delay in the "Typematic Rate (Chars/Sec)"
and "Typematic Delay (Msec)" fields below.
3
BIOS Setup
65