Asus P4P800-F User Manual page 39

15. System panel connector (10-1 pin F_PANEL)
This connector accommodates several system front panel functions.
P4P800-F
P4P800-F Front Panel Audio Connector
• System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• ATX Power Switch / Soft-Off Switch Lead (2-pin PWRBTN)
This connector connects a switch that controls the system power. Pressing the
power switch turns the system between ON and SLEEP, or ON and SOFT
OFF, depending on the BIOS or OS settings. Pressing the power switch while
in the ON mode for more than 4 seconds turns the system OFF.
• Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the system power.
• Hard disk activity LED (2-pin HD_LED)
This 2-pin connector supplies power to the hard disk activity LED. Any read or
write activity of an IDE device cause this LED to light up.
1-28
Power LED
F_PANEL1
®
HDLED
Chapter 1: Product introduction
ATX Power
Switch*
Reset SW