Panasonic CQ-VW100N Operating Instructions Manual page 34

Settings
Basic Setting
Clock
33
Clock setting
Display
On
: clock display ON ("– –:– –" is displayed
before adjusting the clock.)
Off
: clock display OFF
Adjust
}
: Forward
{
: Backward
Clock Mode
RDS
: the clock is automatically adjusted
using the RDS clock time service func-
tion.
Manual
: manually adjusted time is displayed.
Note:
¡To start the clock, touch
¡Set the Daylight Saving Time manually.
34
CQ-VW100N
(continued)
Screen Sound Disc Radio
(Clock display)
default:
(Clock adjustment)
(Clock preference)
(a page 26)
default:
.
default: Hour Adjust: 0
Minute Adjust: 0
ID-Code
ID Code Setting
Prior to operating this unit, it is advisable to assign a 4-
digit ID code for security. Once the ID code has been set,
the unit cannot be operated if the main power supply is
disconnected then re-connected. It is electronically locked
so that a thief cannot use the stolen unit unless that per-
son knows the code you have set.
The ID code operation must be performed only by the
Off person to whom the unit belongs.
Generally, it is not necessary to enter the ID code each
time when using the unit if it has not been disconnected
from the main power supply (car battery).
0 9
to 4 digits numeric code
How to set your ID code (for the first time)
q Enter an 4 digit ID code.
w Enter the same 4 digit ID code again.
How to change your ID code
q Enter the preset (old) 4 digit ID code. If the wrong ID
code is entered, a new ID code cannot be registered.
RDS
w Enter a new 4 digit ID code.
e Enter the new 4 digit ID code again.
How to cancel the known ID code
q Enter the preset (old) 4 digit ID code. If the wrong ID
code is entered, it is not possible to cancel the ID code
function.
w Touch and hold
The ID code cancelling procedure is completed. The unit
now works without an ID code.
Note:
¡ Should your unit ever require service, cancel your ID
code before sending for repair.
¡ The ID code setting cannot be eliminated even by the
memory clear function.
¡ The inputted code is not displayed for your security.
Caution
¡Record your registered ID code and keep it in a
secure location. (Fill in the ID code memo
(a page 46).) If you forget it, you will be unable
to use the unit. In case you forget the ID code,
please consult your nearest Panasonic Service
Centre.
default: none
until "Completed!" is displayed.