Connect to a Wi
If you're using a Wi‑Fi router with Wi‑Fi Protected Setup (WPS), you can connect your phone
easily.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, touch the WI-FI tile to turn it on.
3. Touch
below the WI-FI tile and check the list of detected Wi-Fi.
4. Touch > WPS Push, and then press the WPS button on your Wi‑Fi router.
Note: To use the Wi‑Fi Protected Setup (WPS) PIN method, touch > WPS Pin Entry.
Disconnect from a Wireless Network
Quickly disconnect from a wireless network your phone is connected to.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, touch the WI-FI tile to turn it on.
3. Touch
below the WI-FI tile and check the list of detected Wi-Fi
4. You can:
Touch the wireless network that the phone is connected to, and then touch
Disconnect.
If you want to remove the settings for this network, touch and hold the network name,
and then touch Forget network.
To connect to another wireless network, see
Virtual Private Networks (VPN)
Add virtual private networks (VPNs) so you can connect and access resources inside a local
network, such as your corporate network.
Before you can connect to your organization's local network, you may be asked to:
●
Install security certificates
●
Enter your login credentials
●
Download and install a required VPN app on your phone
Contact your network administrator for details. Also, your phone must first establish a Wi‑Fi or
data connection before you can start a VPN connection. For information about setting up and
Web and Data
‑
Fi Network via WPS
Turn Wi-Fi On and Connect to a Wireless
Network.
145