Connecting To Optional Equipment - LG V782W Owner's Manual

Connections (Continued)

Connecting to Optional Equipment

Connecting to an amplifier equipped with two chan-
nel analog stereo or Dolby Pro Logic II /Pro Logic
Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
Connect this unit's DIGITAL AUDIO OUT jack
1 1
(COAXIAL or OPTICAL) to the corresponding in
jack on your amplifier. Use a digital (coaxial or
optical) audio cable.
You will need to activate this unit's digital output.
2 2
(See "Digital Audio Output" on page 18).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Rear of this unit
2 channel analog stereo or Dolby Pro Logic II / Pro Logic connection
Both DVD and
DVD exclusive out
VCR out
L R
AUDIO INPUT
Amplifier (Receiver)
10
– If the audio format of the digital output does not match
– To see the audio format of the current DVD in the On-
R
Pr
Pb L
Y
Digital
multi-channel
connection
(DVD exclusive
out connecttion)
COAXIAL OPTICAL
DIGITAL INPUT DIGITAL INPUT
Notes
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Screen Display, press AUDIO.