Connecting The Docking Station To Your Computer - Targus acp50ca User Manual

Targus Mobile Docking Station with Video
Installing the Docking Station Driver
Installing the docking station driver enables your
operating system to recognize the docking station and its
ports once it's connected.
1 Turn on your computer.
2 Insert the driver software CD into your computer's CD-
ROM drive.
3 If setup does not begin automatically, click Start, Run,
then enter D:\Setup.exe (where D: is the path of your
CD-ROM drive) and then click OK.
4 Follow any on-screen instructions to complete the
installation.
5 Click Finish and restart your computer when
prompted.
Connecting the Docking Station to
Your Computer
After installing the docking station software, you are
ready to connect the docking station to your computer. To
do this:
1 Connect the supplied AC power adapter to the AC
power jack on the docking station.
2 Connect one end of the USB cable to the docking
station and the other end into an available USB 2.0
port on your computer.
NOTE: T
HE DOCKING STATION WILL NOT FUNCTION PROPERLY
WITHOUT THE
AC
ADAPTER PLUGGED INTO AN
6
AC .
OUTLET