Rs-232C] - Panasonic PT-RQ13K Operating Instructions Manual

[COMMAND]
[INPUT]
[OPERATING MODE]
[MULTI DISPLAY]
*1 This can be set when the optional Interface Board equipped with corresponding input is installed in <SLOT 1>.
*2 This can be set when the optional Interface Board equipped with corresponding input is installed in <SLOT 2>.
*3 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input
name is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the input name is selected, it will be disabled.
*4 If you change the settings while using the projector, the duration until the luminance of light source decreases by half may shorten or the
luminance may decrease.
11) Press the <ENTER> button.
f The command is fixed and n is displayed at the left of the selected command.
f After the command is fixed, press the <MENU> button to close the detailed setting screen.
12) Press asqw to select [STORE], and press the <ENTER> button.
Note
f To delete a command that has been already set, press the <DEFAULT> button on the remote control while the screen in Step 5) is
displayed, or select [DELETE] at the screen in Step 6) and press the <ENTER> button.
f If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command
number.
f The operating time will be the local time. (x page 139)
f If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with the schedule function may not be executed.

[RS-232C]

Set the communication conditions of the <SERIAL IN>/<SERIAL OUT> terminal. Refer to "<SERIAL IN>/<SERIAL
OUT> terminal" (x page 204).
Chapter 4 Settings — [PROJECTOR SETUP] menu
Detailed settings of
[COMMAND]
[SDI1]
[SDI2]
[SDI3]
[SDI4]
[DIGITAL LINK]
[HDMI1 [SLOT1]]
[HDMI2 [SLOT1]]
[HDMI3 [SLOT2]]
[HDMI4 [SLOT2]]
[DVI-D1 [SLOT1]]
[DVI-D2 [SLOT1]]
[DVI-D3 [SLOT2]]
[DVI-D4 [SLOT2]]
[SDI1 [SLOT1]]
*1
[SDI2 [SLOT1]]
*1
[SDI3 [SLOT2]]
*2
[SDI4 [SLOT2]]
*2
[INPUT1] - [INPUT10]
[NORMAL]
[ECO]
[LONG LIFE1]
[LONG LIFE2]
*4
[LONG LIFE3]
[USER1]
[USER2]
[USER3]
[OFF]
[USER1]
[USER2]
[USER3]
Switches the input to SDI1.
Switches the input to SDI2.
Switches the input to SDI3.
Switches the input to SDI4.
Switches the input to DIGITAL LINK.
Switches the input to HDMI1 of the Interface Board.
*1
Switches the input to HDMI2 of the Interface Board.
*1
Switches the input to HDMI3 of the Interface Board.
*2
Switches the input to HDMI4 of the Interface Board.
*2
Switches the input to DVI-D1 of the Interface Board.
*1
Switches the input to DVI-D2 of the Interface Board.
*1
Switches the input to DVI-D3 of the Interface Board.
*2
Switches the input to DVI-D4 of the Interface Board.
*2
Switches the input to SDI1 of the Interface Board.
Switches the input to SDI2 of the Interface Board.
Switches the input to SDI3 of the Interface Board.
Switches the input to SDI4 of the Interface Board.
Switches the input to DIGITAL LINK, and switches the input of the
*3
Panasonic twisted-pair-cable transmitter to the specified input.
Prioritizes luminance.
Controls the power to increase the life of the light source with higher
luminance.
Controls the power to increase the life of the light source although
the luminance is lower than that of [ECO].
Controls the power to increase the life of the light source although
the luminance is even lower than that of [LONG LIFE1].
Controls the power to increase the life of the light source to the
maximum although the luminance is even lower than that of [LONG
LIFE2].
Controls the power with the setting set to [USER1].
Controls the power with the setting set to [USER2].
Controls the power with the setting set to [USER3].
Does not use the multi-display function.
Displays four-screen display with the setting in [USER1].
Displays four-screen display with the setting in [USER2].
Displays four-screen display with the setting in [USER3].
Description
ENGLISH - 141