Installing The Wind Baffle - Samsung AC030JXADCH Installation Manual

8 . Silence Mode DIP switch option
f DIP switch(SW507) option f
Switch 3 Switch 4
On On
On Off
Off On
Off Off

Installing the wind baffle

If you operate the cooling operation of air conditioner in the condition where ambient temperature is lower than 23 °F
DB(Dry bulb), or the outdoor unit might be faced with strong wind directly, the wind baffle should be installed to prevent the
outdoor unit fan from operating in reverse way .
Make holes on both sides and attach the
wind baffle using screws .
• When attaching the wind baffle using screws, be careful that the screws do not damage the partition .
CAUTION
• Install outdoor units with the back surface facing wall side to eliminate the effects of external wind .
NOTE
4way Outdoor_북미향_IM_EN_DB68-05152A-00_CS6.indd 31
Disable Silence mode
Silence mode 1st step
Silence mode 2nd step
Silence mode 3rd step
Make holes on both sides and attach the
wind baffle using screws .
<Front View>
"A"
<Top Down View>
"A" – Should be 7 7/8 inch or longer
Operation
"A"
Partition
24 . 6 inch
0 . 6 3 inch
31
2015-01-05 오후 5:00:56