Page 1
Install the software first before connecting the webcam to your PC. You will be prompted to restart your PC during this installation. Close and save all work before installing this device. Model IC50C...
Page 2
Consult a service representative for help. Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Micro Innovations is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Page 3
Table of Contents Getting Started……………………………..…………………………………………………………..….…. Installing Your Webcam…...………………….……………..………………………………………….…… Using EZ Media Box 2.0™…………………………………………………………………………………… Troubleshooting…...………………….…………………………………………………………….………… Helpful Hints and Technical Support…...………………….………………………..…..………..………… Page 4 Page 5 Page 6 Page 7 Page 8...
Getting Started Congratulations on the purchase of your new Basic Webcam. The Basic Webcam is compatible with IBM® or compatible PCs with an available USB port. It is supported by Windows® 98SE, Me, 2000, XP and Vista™. Package contents: • Basic Webcam (USB) •...
Installation Procedures During the software installation, you must install the DRIVER. You can install the E-Z Media Box 2.0™ software at a later time. Frequently check for updated webcam software by visiting our website, www.microinv.com. Turn on your computer. Note in order for you to use your webcam you must install the software before plugging the webcam into your PC.
Page 6
Using EZ Media Box 2.0 ™ This program will allow you capture, edit and organize your video and other multimedia files. If you did not install the EZ Media Box 2.0™ software during the initial software installation, reinsert the Basic Webcam software CD into your PC.
Troubleshooting Problem “No capture device found” error “Camera not connected” error Webcam image is blurry Webcam image is too dark (Black or green screen) Make sure you have connected the webcam correctly into the USB port or try a different USB port on your PC. Try removing the previous driver and reinstalling the software.
Helpful Hints The following hints will help you achieve the best results with your webcam: Webcam placement • Position the webcam so that the subject is centered. • Place the webcam on a steady surface. Lighting • Use sufficient lighting. •...