Page 1
Before installing device it is recommended that your operating system contain the most recent updates and service packs available. Install the software first before connecting the webcam to your PC. You will be prompted to restart your PC during this installation. Close and save all work before installing this device. Model IC460C...
Page 2
• Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Micro Innovations is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Congratulations on the purchase of your Zoom 2.0 Webcam for Notebooks The Zoom 2.0 Webcam for Notebooks is compatible with IBM® or compatible PCs with an available USB port. It is supported by Windows® XP (Service Pack 2), Vista™. Feature Benefits: 1.3 Mega Pixel Maximum Resolution •...
Installation Procedures During the software installation, you must install the DRIVER. You can install the E-Z Media Box 2.0 software at a later time. Frequently check for updated webcam software by visiting our website, www.microinv.com. Turn on your computer. Note: In order for you to use your webcam you must install the software before plugging the webcam into your PC.
Using EZ Media Box 2.0 This program will allow you capture, edit and organize your video and other multimedia files. If you did not install the EZ Media Box 2.0 software during the initial software installation, reinsert the webcam software CD into your PC.
Troubleshooting Problem “No capture device found” error “Camera not connected” error Webcam image is blurry Webcam image is too dark (Black or green screen) Make sure you have connected the webcam correctly into the USB port or try a different USB port on your PC. There may be a conflict with previous camera/scanner software installed on your PC.
Never use harsh or abrasive cleaners or organic solvents on the webcam or on any of its parts. • Never disassemble or touch the inside of the webcam. Only Micro Innovations may service or repair this device. • For technical assistance visit www.microinv.com or call toll free: 1-877-550-5534.