Indicators - Mitsubishi Electric HC8000D User Manual

Indicators

This projector has two indicators, each of which shows the operation condition of the projector.
The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your
dealer.
POWER indicator
Normal condition
POWER STATUS
Off
Steady
red
Blinking
green
Blinking
green
Steady
green
Steady
green
Abnormal condition
POWER STATUS
Steady
green
or
Blinking orange
Steady
red
Steady
Blinking green
red
Steady
Blinking green/red
green
Blinking red
Steady
red
Steady red
Off
Blinking
Steady
green/red
or
Blinking
CONDITION
Stand-by
Lamp stand-by for power-off
Lamp stand-by for power-on
The power is on. (Normal condition)
CONDITION
Abnormal temperature
• The vents are clogged with dust or dirt.
• The room temperature is high.
The protection circuit is working or the lamp is in an
abnormal condition.
The lamp operation time exceeds the time elapsed
until the shut-off time notice while the power is on.
(See page 42.)
The lamp operation time exceeds the time elapsed
until the shut-off time notice while the power is off.
(See page 42.)
The lamp operation time exceeds the time elapsed
until the shut-off time. (See page 42.)
The lamp cover isn't closed.
Abnormal.
STATUS indicator
NOTE
The power cannot be turned on by pressing
the POWER button.
The power cannot be turned off by pressing
the POWER button.
POSSIBLE SOLUTION
• Clean the vents.
• Relocate the projector to a cooler place.
• Wait until the STATUS indicator goes out,
• If the above solution is not effective,
Replace the lamp.
Change with a new lamp if this problem
recurs.
Close the cover correctly.
Contact your dealer.
EN-51
then press the POWER button.
replace the lamp.