To Connect To Audio Equipment With A Digital Input; To Connect The Power Cord - JVC XV-521BK Instructions Manual

To connect to audio equipment with a digital input

You can enhance the sound quality by connecting the unit's DIGITAL OUT to the digital input of an amplifier, DAT or
MD by using an optional digital cable. The digital audio signal from a disc is directly transferred. If you connect the
unit to a Dolby Digital, DTS or MPEG Multichannel decoder or an amplifier with a built-in decoder by using an
optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, also make the analog connection, because, depending on the disc type, no
audio may be reproduced from the DIGITAL OUT.
DIGITAL OUT
PCM/STREAM
COAXIAL
OPTICAL
VIDEO OUT S-VIDEO
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the "DIGITAL AUDIO OUTPUT"
setting in the "AUDIO" page of the preference display correctly according to the connected audio equipment. If the "DIGITAL
AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
"DIGITAL AUDIO OUTPUT" on page 36.
• With the digital connection, the unit's settings for COMPRESSION and DOWN MIX in the AUDIO page of the preference display
are invalid. Settings for these items must be made from the decoder.

To connect the power cord

When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the
unit's AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The
STANDBY indicator lights and setup is completed.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or
other accidents.
Caution
• Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.
• To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If
the cord is damaged, contact a dealer and get the new power cord.
Downloaded From Disc-Player.com JVC Manuals
• Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.
When using the DIGITAL OUT (OPTICAL) jack, remove
the protection cap. Do not lose the removed cap.
When the DIGITAL OUT (OPTICAL) jack is not used, fix
the protection cap into the jack.
The unit
AUDIO OUT AV OUT
Y/C
AV
COMP.
R L
VIDEO
Red White
Audio cable
(not supplied)
Optical digital cable
(not supplied)
Coaxial digital cable
(not supplied)
AV COMPU LINK
White
Red
Getting started
Digital equipment
IN IN
OPTICAL
LEFT
AUDIO
DIGITAL
RIGHT
COAXIAL
English
Français
14