Advertisement
Identification of connectors:
Connector 3
Connector 2
Connector 1
CN1 (Connector 1)(6 pin MLX)
CN2 (Connector 2)(8 pin minifit) – Temperature Sensors/POT
CN3 (Connector 3)(6 pin minifit) – RC/FC LED
Electrostatic Discharge Risk
Do not touch the Circuit components, because you can damage fuse/burned or weaken the
board.
Always handle the Boards by the sides/plastic holder.
Spare parts/stock boards if outside the BOX must be kept in anti-static packaging.
– Compressor, Heater and Power Cord
WARNING
11
Advertisement
