Connecting A Vcr; Connecting An S-Vhs Vcr - Samsung LN-R238W Quick Setup Manual

Connecting a VCR

1
1
Connect the cable TV or antenna to the ANT IN terminal on the back of the VCR.
2
Connect an RF cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
3
Connect a video cable between the VIDEO OUT jack on the VCR and the AV IN [VIDEO] jack on the TV.
Connect an audio cable between the AUDIO OUT jacks on the VCR and the AV IN [R-AUDIO-L]
4
jacks on the TV.
If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the
R-AUDIO-L jacks on the TV

Connecting an S-VHS VCR

1
1
Connect the cable TV or antenna to the ANT IN terminal on the back of the VCR.
2
Connect an RF cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
3
Connect an S-Video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO IN jack on the TV.
Connect an audio cable between the AUDIO OUT jacks on the VCR and the AV IN [R-AUDIO-L]
4
jacks on the TV.
An S-Video cable is usually included with an S-VHS VCR.
VCR Rear Panel
4
Audio Cable (Option)
3
Video Cable (Option)
2
VCR Rear Panel
4
Audio Cable (Option)
3
S-Video Cable (Option)
2
TV Rear Panel
RF Cable
TV Rear Panel
RF Cable