Table of Contents
Advertisement
3. When prompted, press the <SpaceBar> to select Yes from the
Consistency Check dialog box, then press <Enter>. You may also press
<F10> to check the drive consistency.
A progress bar appears on screen.
4. While checking the disk consistency, press <Esc> to display the
following options.
• Stop - Stops the consistency check. The utility stores the percentage
• Continue - Continues the consistency check.
• Abort - Aborts the consistency check. When you restart checking, it
5. When checking is complete, press any key to continue.
6-26
of disk checked, When you restart checking, it continues from
the last percentage completed rather than from zero percent.
continues from zero percent.
Chapter 6: RAID configuration
Advertisement
Table of Contents
