8. Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be
adjusted by remote control in Service Mode.
8.1. How to enter SERVICE
Simultaneously press MUTE button (
26
16 09 06
RED GAIN 46
Key Command
* Press the selection button (
* Press the selection button (
* Each adjustment values will stored automatically.
8.2. How to exit SERVICE
To exit from Service mode, press menu or Power button on remote control.
) on remote control and program DOWN button (
GRN GAIN 43
99
OPTION1
OPTION 2
ADC CLAMP
RED 10
ADC CLAMP
GREEN 10
) or program up/down button (
) or volume up/down button(
BLUE GAIN 45
3C
AGC LEVEL 24
4F
AVL 00
ADC GAIN
BLUE 18
ADC CLAMP
BLUE 10
) to step up/down through the functions.
) to change the function values.
13
TX-20LA6
TX-20LA60
) on the TV set.
RED BIAS 32
GRN BIAS 32
ADC GAIN
RED 18
ADC GAIN
GREEN 18
CCU OFF
SHIPPING
4C 3C