Assembling Your Sunbeam Garment Steamer - Sunbeam SG3000 User Manual

Assembling your Sunbeam
Garment Steamer
The steam hose
• Screw the steam hose into the base.
Screw tight.
The twin poles
• There are 2 poles. One end will have a
small hole. Face this to the front of the
unit and insert into the pole space on
the base. Push the pole down firmly, and
press the 'Push' button until you hear a
click. The poles should be firm inside the
base. Repeat with the other pole.
2
• The poles are telescopic for easy storage.
There are 3 sections per pole. Starting at
the bottom, open the clip on the first pole
and pull upwards so that the telescopic
poles inside can be drawn upwards. When
it's at the maximum length, close the clip.
Repeat with the other section of pole.
Garment hanger
• Insert the garment hanger on top of the
poles
• For easy storage, the hand steam guard
rests on the garment hanger.