Preparing Your Device For Use - Vivitar DPF-30 Owner's Manual

Button Functions
Up Button: Pushing the UP Button allows you to scroll UP or backwards.
Down Button: Pushing the DOWN Button allows you to scroll DOWN or forward
Menu Button/ Power Button: By quickly pushing this button you will enter the selected setting. By
pressing the button down for 3 or 4 seconds you can power on or power off your device.
Reset Button: Press the reset button in order to reset your device. This can be used if your device
is not powering off properly.
USB Port: Connect the included USB cable to this port in order to connect your device to your
computer so it can be charged, or so that you can load new photos.

Preparing Your Device for Use

To charge the battery of your Digital Photo Frame
Your device has a built in lithium battery. A red battery icon will flicker on the LCD screen
when your Digital Photo Frame battery is running low. After 10 seconds, your Photo Frame will
automatically turn off. You can recharge your lithium battery by connecting your photo frame to the
computer with the included USB cable.
6