Loading Photos From Your Computer - Vivitar DPF-30 Owner's Manual

When EXIT is selected, your LCD screen will go back to showing stored photos.
Loading Photos from Your Computer onto Your Digital Photo Frame
In order to load photos from your computer, simply connect your Photo Frame to your computer by
inserting one end of the included USB connection cable to the USB port on your Photo Frame, and
the other end to an available USB port on your computer. Make sure that you have the USB
Connect setting on your Photo Frame selected. To do so, follow the steps below:
USB CONNECT
A. Press the Menu button once so that the Main Menu appears on your Photo Frame.
B. Press the
C. Press the Menu button to confirm
USB CONNECT SETTINGS
YES:
When YES is selected, you can connect your Photo Frame to your computer in order to load
photos on to your Photo Frame.
NO:
When NO is selected, your computer will not recognize your Photo Frame and you will not
be able to load photos from your computer.
You can use the
enter this setting.
or button repeatedly until USB CONNECT is highlighted.
or buttons to highlight YES or NO. You can press the Menu to
15