Honeywell 2111 Manual page 6

SETUP & OPERATION
STEP 4: PROGRAM NEW USER CODES
SECURITY NOTE: To insure privacy, this procedure should be repeated for
both of the factory pre-set codes
1. Unlock the safe with the first factory pre-set (or
current active) code.
2. If correct code is entered, "
on the LCD panel, and you will hear a chime
tone indicating the safe is unlocked.
3. Immediately enter "
code followed by the "
digit code, you will not need to enter the "
key after.
4. If entered correctly, "
display followed by a chime and the new code
number will appear for 1 second.
Repeat this process to reprogram the second factory pre-set code.
Your new code is now ready to use and the previous code is erased from
memory. If you wish to change your new code, simply repeat the process
with current active user code(s) and enter new code(s).
TO OPEN THE SAFE USING NEW USER CODE(S):
Repeat the process described in STEP 3: UNLOCK AND OPEN SAFE,
substituting the new user code(s) for the factory preset user code(s)
OPEN
" will appear
"
then a new 4-8 digit
#
" key. (if you use an 8-
IN
" will appear on blue
1.
2.
3.
#
"
4.
__ __ __ __