Table of Contents
Advertisement
SETUP & OPERATION
STEP 3: UNLOCK AND OPEN THE SAFE
This safe is equipped with a dual digital/key lock system that requires entering
an active user code to unlock it and an entry key to open. It allows for two
separate reprogrammable active user codes.
The preset factory user codes are "
1. Begin by inserting the entry key into the
cylindrical key hole on the left side of the
control panel.
2. On the keypad enter the
#
"
" key, then the user code "
#
followed by "
3. If correct code is entered,
appear on the LCD panel, and you'll hear a
chime tone indicating the safe is unlocked.
4. Within 5 seconds, turn the key to the right
(clockwise) and pull the door open.
TO LOCK THE SAFE:
Carefully close the door, turn the key
counterclockwise to the left and remove.
The safe is now locked and an active user
code will need to be re-entered to open.
1 2 3 4
" key again.
OPEN
1 2 3 4
1 2 3 4 5 6
" and "
1.
2.
",
3.
will
4.
".
Hide quick links:
Advertisement
Table of Contents
